Yamaha YZFR1X(C) Скачать руководство пользователя | Manualshive

Страница: 26 / 118

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3

Coolant temperature display

The coolant temperature display indi-
cates the temperature of the coolant.
Push the “RESET” button to switch the
coolant temperature display to the air
intake temperature display.

NOTE:

When the coolant temperature display
is selected, “C” is displayed for one
second, and then the coolant tempera-
ture is displayed.

CAUTION:

ECA10020

Do not operate the engine if it is
overheated.

Air intake temperature display

The air intake temperature display indi-
cates the temperature of the air drawn
into the air filter case. Push the “RE-
SET” button to switch the coolant tem-
perature display to the air intake
temperature display.

NOTE:

●

Even if the air intake temperature
is set to be displayed, the coolant
temperature warning light comes
on when the engine overheats.

●

When the key is turned to “ON”,
the coolant temperature is auto-
matically displayed, even if the air
intake temperature was displayed
prior to turning the key to “OFF”.

●

When the air intake temperature
display is selected, “A” is displayed
before the temperature.

Self-diagnosis devices

This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on, and then the right display will indi-
cate a two-digit error code.
If the right display indicates any error
codes, note the code number, and then
have a Yamaha dealer check the vehi-
cle.

1. Coolant temperature display

1. Air intake temperature display

1. Error code display

U4C811E0.book Page 8 Thursday, June 7, 2007 2:38 PM

«
...
24
25
26
27
28
...
»

Содержание YZFR1X(C)























































































































Отзывы:

Нет отзывов

Похожие инструкции для YZFR1X(C)

Бренд: Parkside Страницы: 89

Бренд: Parkside Страницы: 28

Бренд: S&B Filters Страницы: 7

SPORTCITY CUBE 125

Бренд: APRILIA Страницы: 157

Бренд: Shark Страницы: 52

Бренд: Memphis Shades Страницы: 2

XRM125 CFT125 2020

Бренд: Honda Страницы: 111

Бренд: hepco & becker Страницы: 4

6304541 00 02 chrom

Бренд: hepco & becker Страницы: 6

Бренд: DYNATEK Страницы: 13

990D0-E5500-000

Бренд: Suzuki Страницы: 10

Бренд: DYNATEK Страницы: 12

Бренд: TM Страницы: 80

Бренд: Brixton Страницы: 49

VarioProtect PANORAMA-W R-TC

Бренд: Schweißkraft Страницы: 22

Бренд: HYOSUNG Страницы: 100

Бренд: HYOSUNG Страницы: 96

Бренд: Yamaha Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды