PERIODIC MAINTENANCE AND MINOR REPAIR
6-14
6
NOTE:
The engine oil should be between the
minimum and maximum level marks.
4. If the engine oil is at or below the
minimum level mark, add sufficient
oil of the recommended type to
raise it to the correct level.
To change the engine oil (with or
without oil filter cartridge replace-
ment)
1. Remove cowling C. (See page
2. Start the engine, warm it up for
several minutes, and then turn it
off.
3. Place an oil pan under the engine
to collect the used oil.
4. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
Skip steps 5–7 if the oil filter cartridge is
not being replaced.
5. Remove the oil filter cartridge with
an oil filter wrench.
NOTE:
An oil filter wrench is available at a
Yamaha dealer.
6. Apply a thin coat of engine oil to
the O-ring of the new oil filter car-
tridge.
1. Engine oil level check window
2. Maximum level mark
3. Minimum level mark
4. Engine oil filler cap
1. Engine oil drain bolt
1. Oil filter wrench
2. Engine oil filter cartridge
U4C811E0.book Page 14 Thursday, June 7, 2007 2:38 PM
Содержание YZFR1X(C)
Страница 1: ...4C8 28199 11 YZFR1X C OWNER S MANUAL LIT 11626 21 41 ...
Страница 2: ...EAU10041 U4C811E0 book Page 1 Thursday June 7 2007 2 38 PM ...
Страница 117: ...U4C811E0 book Page 3 Thursday June 7 2007 2 38 PM ...
Страница 118: ...PRINTED IN JAPAN 2007 06 3 0 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...