Yamaha YZF-R1 Скачать руководство пользователя страница 321

Страница: 321 / 808

VALVES AND VALVE SPRINGS

5-38

EAS30283

REMOVING THE VALVES

The following procedure applies to all of the
valves and related components.

TIP

Before removing the internal parts of the cylinder
head (e.g., valves, valve springs, valve seats),
make sure the valves properly seal.

1. Remove:

• Valve pad

TIP

Make a note of the position of each valve pad so
that they can be reinstalled in their original place.

2. Check:

• Valve sealing

Leakage at the valve seat

→

Check the valve

face, valve seat, and valve seat width.
Refer to “CHECKING THE VALVE SEATS”
on page 5-40.
a. Pour a clean solvent “a” into the intake and

exhaust ports.

b. Check that the valves properly seal.

TIP

There should be no leakage at the valve seat “1”.

3. Remove:

• Valve cotters

TIP

Remove the valve cotters by compressing the
valve spring with the valve spring compressor
“1” and the valve spring compressor attachment
“2”.

4. Remove:

• Valve spring retainer
• Valve spring (outer)
• Valve spring (inner)
• Valve
• Valve stem seal
• Valve spring seat

TIP

Identify the position of each part very carefully so
that it can be reinstalled in its original place.

EAS30284

CHECKING THE VALVES AND VALVE
GUIDES

The following procedure applies to all of the
valves and valve guides.
1. Measure:

• Valve-stem-to-valve-guide clearance

Out of specification

→

Replace the valve

guide.

Valve spring compressor

90890-04019

Valve spring compressor

YM-04019

Valve spring compressor attach-
ment (ø26)

90890-01243

Valve spring compressor adapt-
er (26 mm)

YM-01253-1

• Valve-stem-to-valve-guide clearance =

Valve guide inside diameter “a” -
Valve stem diameter “b”

959

Содержание YZF-R1









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание YZF-R1

Отзывы:

Бренды по названию

Популярные бренды

Yamaha YZF-R1, Руководство по обслуживанию

Результаты поиска

Содержание YZF-R1

Отзывы:

Бренды по названию

Популярные бренды