Yamaha YZF-R1, Руководство к набору

Страница: 34 / 77

– 31 –
14. Air Funnel Set (2CR-1440B-70)
Parts List
Installation
1. Assembling the primary funnel
Secure the primary funnel 1 and 2 to the
throttle body with the supplied button head
bolts. At this time, install the STD lever 1 and
2 and fix them.
2. Assembling the secondary funnel
Install the secondary funnel to the lever 1
and 2. Then, fit the STD bushes to the lever
assembling positions. (5 locations)
Ycci System Control
You can use the Ycci system as the kit funnel.
You can control the operation timing by using
the YMS software packed together with the
kit ECU.
You can also control the STD funnel by using
the YMS software.
No. PART No. PART NAME Q'TY REMARKS
1 2CR-14479-70 SECONDARY FUNNEL 1
2 2CR-14469-70 PRIMARY FUNNEL 1 1
3 92014-06025 BUTTON HEAD BOLT 3
4 2CR-1446C-70 PRIMARY FUNNEL 2 1
5 92014-06025 BUTTON HEAD BOLT 3
Lever 1
Lever 2
The set of the camshaft, valve spring, ECU
and air funnel must be used in the following
combination.
NOTICE
Using in other combinations may possibly
damage the engine.
Be
sure to use in the combination as
stated below.
MODEL CAMSHAFT (IN) CAMSHAFT (EX) VALVE SPRING ECU AIR FUNNEL SET
2015
2CR-12170-70 2CR-12180-70 2CR-A2110-70
2CR-8591A-70 MGC-191114-00
2016 2CR-8591A-71 2CR-1440B-70
Bush (5 locations)
TIP
The STD seal rubber is not used at the
bottom surface (face to the primary
funnel) of the secondary funnel.