Periodic maintenance and adjustment
8-16
8
8. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
TIP
After the engine is started, the oil pres-
sure and coolant temperature warning
light should go off if the oil level is suf-
ficient.
NOTICE
ECA22490
If the oil pressure and coolant tem-
perature warning light flickers or re-
mains on even if the oil level is
correct, immediately turn the engine
off and have a Yamaha dealer check
the vehicle.
9. Turn the engine off, wait a few
minutes for the oil level to settle for
an accurate reading, and then
check the oil level and correct it if
necessary.
To change the engine oil and replace
the oil filter cartridge
1. Remove cowling A and panel C.
2. Follow steps 1–3 of the “To
change the engine oil” section for
the oil draining procedure.
3. Remove the oil filter cartridge with
an oil filter wrench.
TIP
An oil filter wrench is available at a
Yamaha dealer.
4. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
TIP
Make sure that the O-ring is properly
seated.
5. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1. Oil filter cartridge
2. Oil filter wrench
1
2
1. O-ring
1
UB3L12E0.book Page 16 Thursday, July 29, 2021 4:13 PM
Содержание YZF R1 2021
Страница 142: ...UB3L12E0 book Page 3 Thursday July 29 2021 4 13 PM...
Страница 144: ...DIC183 PRINTED IN JAPAN 2021 08 0 4 1 CR E...