5 - 47
CHAS
HANDLEBAR
9. Install:
• Engine stop switch
1
• Clutch lever holder
2
• Bolt (clutch lever holder)
3
• Hot starter lever holder
4
• Bolt (hot starter lever holder)
5
• Clamp
6
NOTE:
• The engine stop switch, clutch lever holder
and clamp should be installed according to
the dimensions shown.
• Pass the engine stop switch lead in the mid-
dle of the clutch lever holder.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
10. Install:
• Clutch cable
1
• Hot starter cable
2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.
11. Adjust:
• Clutch lever free play
Refer to “CLUTCH ADJUSTMENT” sec-
tion in the CHAPTER 3.
• Hot starter lever free play
Refer to “HOT STARTER LEVER
ADJUSTMENT” section in the CHAPTER
3.
12. Clamp the clamp portion
a
of the number
plate to the handlebar.
13. Insert the end of the fuel tank breather
hose
1
into the hole in the steering stem
cap
2
.
2
1
a
