Yamaha YZ250 2022, Руководство по эксплуатации для владельца

Страница: 190 / 274

CLUTCH
5-28
TIP
Pitting on the clutch boss splines will cause er-
ratic clutch operation.
EAM30114
CHECKING THE PRESSURE PLATE
1. Check:
•
Pressure plate
Crack/damage

Replace.
EAM30115
CHECKING THE PUSH LEVER SHAFT
1. Check:
•
Push lever shaft
Wear/damage

Replace.
EAM30484
CHECKING THE PUSH RODS
1. Check:
•
Push rod 1 “1”
•
Bearing “2”
•
Washer “3”
• Push rod 2 “4”
Cracks/damage/wear

Replace.
2. Measure:
• Push rod 2 bending limit
Out of specification

Replace.
EAM30117
CHECKING THE PRIMARY DRIVE GEAR
1. Check:
•
Primary drive gear
Damage/wear

Replace the primary drive
and primary driven gears as a set.
Excessive noise during operation

Replace
the primary drive and primary driven gears as
a set.
2. Check:
• Primary-drive-gear-to-primary-driven-gear
free play
Free play exists

Replace the primary drive
and primary driven gears as a set.
EAM30118
CHECKING THE PRIMARY DRIVEN GEAR
1. Check:
• Primary driven gear
Damage/wear

Replace the primary drive
and primary driven gears as a set.
Excessive noise during operation

Replace
the primary drive and primary driven gears as
a set.
EAM30121
INSTALLING THE CLUTCH
1. Install:
•
Bearing “1”
• Oil seal “2”
•
Push lever shaft “3”
• Copper washer “4”
•
Push lever shaft bolt “5”
TIP
Apply the lithium-soap-based grease on the oil
seal lip.
G088995
Push rod bending limit
0.30 mm (0.012 in)
Push lever shaft bolt
6 N·m (0.6 kgf·m, 4.4 lb·ft)
Ne w
Ne w
T
R
.
.