Yamaha YZ125(N)/LC, Руководство по эксплуатации для владельца

Страница: 182 / 558

3-27
FRONT FORK OIL SEAL AND DUST SEAL CLEANING/
FRONT FORK REBOUND DAMPING FORCE ADJUSTMENT
INSP
ADJ
Minimum
20 clicks out
(from maximum
position)
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
9 Protector
9 Dust seal
1
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
9 Dust seal
a
9
Oil seal
b
NOTE:
9
Clean the dust seal and oil seal after every run.
9
Apply the lithium soap base grease on the in-
ner tube.
EC36H002
FRONT FORK REBOUND DAMPING
FORCE
ADJUSTMENT
1. Adjust:
9 Rebound damping force
9 STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
Stiffer
a a
→
Increase the rebound damping
force. (Turn the adjuster
1 1
in.)
Softer
b b
→
Decrease the rebound
damping force. (Turn the
adjuster
1 1
out.)
Extent of adjustment:
Maximum
Fully turned in
position
Standard position:
12 clicks out
*10 clicks out
*For EUROPE
5MV-9-30-3B 6/19/00 1:49 PM Page 18