Yamaha YT624 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 76

Yamaha YT624 Скачать руководство пользователя страница 53

– 48 –

PERIODIC MAINTENANCE

CHECKING AND CLEANING

THE SPARK PLUG

The spark plug is an important component
that can be checked relatively easily. As
the effectiveness of the spark plug gradu-
ally falls over time and according to how it
is used, periodic inspections involving re-
moval of the spark plug are required.

WARNING

9

The engine and muffler will still be

very hot immediately after the engine
is stopped. Exercise care not to burn
yourself.

9

When removing or installing the

spark plug, exercise care not to dam-
age its insulator. Poor electrical insu-
lation could cause high voltage leaks

resulting in a fire and serious burns.

1. Stop the engine and remove the engine

switch key.

2. Remove the spark plug cap.

1

2

1. Spark plug cap
2. Spark plug

3. Remove the spark plug using a spark

plug wrench.

1

2

1. Spark plug cap
2. Spark plug wrench

4. Check the spark plug for any signs of

burns.

Burn marks on spark plugs are usually

medium-to-light tan. If there are any
black or white burn marks, consult a
Yamaha dealer.

5. Remove deposits (carbon) from the

spark plug electrode using a plug clean-
er or a wire brush.

6. Check the spark plug number and spark

plug gap.

Spark plug number:

NGK BPR4ES

Spark plug gap:

0.7–0.8 mm (0.028–0.031 in)

1

2

3

1. Spark plug gap
2. Spark plug number
3. Insulator

7T0-28199-70-E0.indd 48

2019/05/01 9:23:01

«
...
51
52
53
54
55
...
»

Содержание YT624













































































Отзывы:

Нет отзывов