Yamaha YT624 Скачать руководство пользователя страница 49

Страница: 49 / 76

– 44 –

PERIODIC MAINTENANCE

CHANGING THE ENGINE OIL

WARNING

Position the Snowblower on a level

surface.

When you have just stopped the en-

gine, do not drain the engine oil as
it will still be very hot. Change the
engine oil after the engine has cooled
down.

TIP

As correct disposal of used oils is man-

dated by regulations (such as pollution
prevention act), consult a Yamaha dealer
for oil disposal guidelines.

For the first engine oil change, change

the engine oil after 20 operating hours
(that is, when you have refueled four
times). After that, change the engine oil
each time the winter season begins.

1. Start the engine and warm up for 2–3

minutes.

2. Stop the engine and remove the engine

switch key.

3. Remove the screws 1. Then, remove

the screws 2 and collars, and the right
side cover.

1.  Screw 1
2.  Screw 2
3. Collar
4.  Right side cover

Remove the engine oil filler cap.

1. Engine oil filler cap

5. Remove the screws 1. Then, remove

the screw 2 and collar, and the left side
cover.

1.  Screw 1
2.  Screw 2
3. Collar
4.  Left side cover

6. Place a suitable container below the

engine oil drain bolt to collect the used
oil.

7. Drain the engine oil completely by re-

moving the engine oil drain bolt, and its
gasket.

7T0-28199-70-E0.indd 44

2019/05/01 9:23:00

Содержание YT624













































































Результаты поиска

Содержание YT624

Отзывы:

Похожие инструкции для YT624

Бренды по названию

Популярные бренды

Yamaha YT624, Руководство пользователя

Результаты поиска

Содержание YT624

Отзывы:

Похожие инструкции для YT624

Бренды по названию

Популярные бренды