background image

 

ii

 

1

 

Read Instructions — All the safety and operating 
instructions should be read before the unit is oper-
ated.

 

2

 

Retain Instructions — The safety and operating 
instructions should be retained for future reference.

 

3

 

Heed Warnings — All warnings on the unit and in 
the operating instructions should be adhered to.

 

4

 

Follow Instructions — All operating and other 
instructions should be followed.

 

5

 

Water and Moisture — The unit should not be used 
near water – for example, near a bathtub,  wash-
bowl, kitchen sink, laundry tub, in a wet basement, 
or near a swimming pool, etc.

 

6

 

Carts and Stands — The unit should be used only 
with a cart or stand that is recommended by the 
manufacturer.

 

6A

 

An unit and cart combination 
should be moved with care. Quick 
stops, excessive force, and 
uneven surfaces may cause the 
unit and cart combination to over-
turn.

 

7

 

Wall or Ceiling Mounting — The unit should be 
mounted to a wall or ceiling only as recommended 
by the manufacturer.

 

8

 

Ventilation — The unit should be situated so that its 
location or position does not interfere with its proper 
ventilation.  For example, the unit should not be situ-
ated on a bed, sofa, rug, or similar surface, that may 
block the ventilation openings; or placed in a built-in 
installation, such as a bookcase or cabinet that may 
impede the flow of air through the ventilation open-
ings.

 

9

 

Heat — The unit should be situated away from heat 
sources such as radiators, stoves, or other appli-
ances that produce heat.

 

10

 

Power Sources — The unit should be connected to 
a power supply only of the type described in the 
operating instructions or as marked on the unit.

 

11

 

Power-Cord Protection — Power-supply cords 
should be routed so that they are not likely to be 
walked on or pinched by items placed upon or 
against them, paying particular attention to cords at 
plugs, convenience receptacles, and the point 
where they exit from the unit.

 

12

 

Cleaning — The unit should be cleaned only as rec-
ommended by the manufacturer.

 

13

 

Nonuse Periods — The power cord of the unit 
should be unplugged from the outlet when left 
unused for a long period of time.

 

14

 

Object and Liquid Entry — Care should be taken so 
that objects do not fall into and liquids are not 
spilled into the inside of unit.

 

15

 

Damage Requiring Service — The unit should be 
serviced by qualified service personnel when:

 

A.

 

The power-supply cord or the plug has been 
damaged; or

 

B.

 

Objects have fallen, or liquid has been spilled 
into the unit; or

 

C.

 

The unit has been exposed to rain; or

 

D.

 

The unit does not appear to operate normally or 
exhibits a marked change in performance; or

 

E.

 

The unit has been dropped, or the enclosure 
damaged.

 

16

 

Servicing — The user should not attempt service 
the unit beyond those means described in the oper-
ating instructions.  All other servicing should be 
referred to qualified service personnel.

 

17

 

Power Lines — An outdoor antenna should be 
located away from power lines.

 

SAFETY INSTRUCTIONS 

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-SERVICEABLE 

PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

 Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert you to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert you to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

IMPORTANT!
Please record the serial number of this unit in the space below.

Model:
Serial No.:

The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.

WARNING
TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE 
THIS UNIT TO RAIN OR MOISTURE.

Содержание YST-MS55D
















Отзывы: