manualshive.com logo in svg

Yamaha YS928J, Руководство пользователя

Поделиться
Скачать
Yamaha YS928J Скачать руководство пользователя страница 39

– 35 –

1. Auger clutch lever

TIP

If the auger clutch lever is pulled up fully
while you are holding the drive clutch lever,
the auger clutch lever will become fixed to
its pull-up position. The Snowblower will still
travel and blow snow. The shift lever, chute
direction control lever, chute deflector con-
trol lever, or throttle lever can be controlled
with your right hand.

6. Move the shift lever from the “N” (Neu-

tral) position to the “F” (Forward) or “R”
(Reverse) position.

NOTICE

Operate the shift lever slowly.

TIP

•

If the engine speed drops excessively
and snow is not being blown properly,
you may be driving the Snowblower too
quickly. Reduce the speed.

•

Snow is blown more effectively when
the Snowblower is driven slowly.

1. Shift lever
2. “N” (Neutral)

7. When releasing the drive clutch lever,

the auger clutch lever automatically
returns to its original position, the
auger rotation stops, and the Snow-
blower stops moving.

1. Drive clutch lever
2. Auger clutch lever

1

1

2

1

2

OPERATION

7VY-9-70_E0.fm  35 ページ  ２０１０年４月３０日　金曜日　午前９時３５分

Содержание YS928J







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды