manualshive.com logo in svg

Yamaha YS928J, Руководство пользователя

Поделиться
Скачать
Yamaha YS928J Скачать руководство пользователя страница 38

– 34 –

CLEARING SNOW

WARNING

• Do not point the discharge chute

toward people, buildings or cars.

• If any foreign objects have become

lodged in the impeller, auger, or
track, stop the engine immediately
and remove them.
Check the Snowblower for damage.
If any damage is found, repair the
Snowblower completely before
using it again.

1. Adjust the auger to the appropriate

height by using the auger housing
height control lever (see page 19). 

2. Adjust the direction to blow snow by

using the chute direction control lever.

1. Chute direction control lever
2. Right
3. Left
4. Clockwise
5. Counter clockwise

3. Adjust the snow blowing distance by

using the chute deflector control lever.

1. Chute deflector control lever
2. Pull
3. Push
4. Upward
5. Downward

4. Make sure that the shift lever is in the

“N” (Neutral) position, and hold the
drive clutch lever.

NOTICE

Move the shift lever to the “N” (Neutral)
position first, and then hold the drive
clutch lever.

1. Drive clutch lever

5. Pull the auger clutch lever. The auger

starts rotating.

2

3

4

1

5

2

3

4

1

5

1

OPERATION

7VY-9-70_E0.fm  34 ページ  ２０１０年４月３０日　金曜日　午前９時３５分

Содержание YS928J







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды