Yamaha YPS200, Руководство пользователя

Страница: 5 / 8

5 YPS200 Owner’s Man u al
Assembly
C AUTION
When assemblin g the instrument, always use
two or more people.
• Assem b le the instr u ment in a place where
there is s u fficient room.
C AUTION
For safety reasons, do not unlock the casters
until the assembly is completed.
1.
Connect the two le g s with the cross bar.
q
Insert the projections for connection of the legs
into
b oth ends of the cross b ar.
At this time, also align the position of each
screw hole on the legs and the cross
b ar.
w
Using the two kno b b olts, temporarily sec u re
the legs and the cross b ar.
2.
Connect the le g s to the table.
q
Place the ta b le of the stand u pside down on a
piece of card b oard or a cloth spread o u t on the
floor to protect the floor from scratches.
w
Align the position of each screw hole on the b ot-
tom of the ta b le and the legs.
e
Using the fo u r kno b b olts, sec u re the ta b le and
the legs.
r
Tighten the two kno b b olts sec u red in step 1-
w
.
3.
Position the stand upri g ht while bein g care-
ful to avoid overturnin g or fallin g .
4.
Adjust the hei g ht of the table.
q
Loosen the fo u r wing b olts of the legs.
w
Adj u st the height of the slide g u ides.
At this time, align all fo u r scales of the slide
g u ides.
e
Using the fo u r wing b olts, sec u re the slide
g u ides.
r
Loosen each screw of the fo u r memory clamps
b y u sing a t u ning key, and then mo v e the mem-
ory clamps to the b o u ndary line of the leg and
the slide g u ide.
t
Tighten each screw of the fo u r memory clamps
b y u sing a t u ning key.
y
Tighten the fo u r wing b olts of the legs firmly.
5.
Make sure all bolts and screws are ti g htened
securely.
The assembly is now complete.
w
q
Kno b b olt
Projection for
connection
Leg Cross b ar
Screw
holes
w
w
Leg
q
Ta b le
e
Kno b b olt
r
Kno b b olts
To disassemble, follow the assembly steps in
reverse order.
w
qey
w
r
rt
Legs
Slide g u ides
Wing b olt
T u ning key
Memory
clamp
Scale