background image

25

 En

Additional information

ADDITI

ON

AL 

INFO

RM

A

T

IO

N

HDMI

Tuner

The system settings 
change automatically.

When “HDMI CONTROL” is set to 
“ON”, operations of the TV (for 
example, changing channels, etc.) may 
change the system settings, such as the 
surround mode.

Set “HDMI CONTROL” to “OFF” or set 
the system again by using its remote 
control.

23

The remote control 
does not operate the 
system.

The system may be outside the remote 
control operation range.

For information on the remote control 
operation range, refer to “Using the remote 
control”.

14

The remote control sensor of this 
system may be exposed to direct 
sunlight or lighting.

Change the lighting.

The batteries may be worn out.

Replace the batteries.

6

Problem

Cause

Solution

See 

page

“AUTO” set in the 
setup menu “AUDIO 
DELAY” does not 
operate.

The TV does not support 
automatically adjusting the audio 
delay.

Adjust the delay time manually (0 to 240 
ms).

21

The HDMI control 
function does not 
operate properly.

The number of the connected HDMI 
components is over the limit.

Disconnect some of the HDMI 
components.

No picture or sound

The connected HDMI component does 
not support high-bandwidth digital 
copyright protection (HDCP).

Connect the HDMI component that 
supports HDCP.

Problem

Cause

Solution

See 

page

FM stereo reception is 
noisy.

The characteristics of FM stereo 
broadcasts may cause this problem 
when the transmitter is too far away, or 
if the antenna quality is poor.

Check the antenna connections.

12

Try using a high-quality directional FM 
antenna.

Set the reception mode to “MONO”.

17

There is distortion, and 
clear reception cannot 
be obtained, even with 
a good FM antenna.

There is multi-path interference.

Adjust the antenna position to eliminate 
multi-path interference.

The desired station 
cannot be tuned into 
with the automatic 
tuning method.

The signal is too weak.

Use a high-quality directional FM antenna.

Set the reception mode to “MONO” and 
press 

TUNING

 

/

 to change 

frequency by 1 step.

16, 17

Problem

Cause

Solution

See 

page

Содержание YHT-S400
































Отзывы: