Yamaha YFM40FBB Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 156

Yamaha YFM40FBB Скачать руководство пользователя страница 63

7-6

7

opening, even when the throttle lever is pushed to
the maximum. Turning in the adjusting screw limits
the maximum engine power available and de-
creases the maximum speed of the ATV. Turning
in the adjusting screw decreases top speed, and
turning it out increases top speed. (See page
4-11.)

Loading and accessories

WARNING

EWB01462

Improper loading or towing can increase the
risk of loss of control, an overturn, or other ac-
cident. To reduce the risk of an accident:

●

Do not exceed the maximum loading limits
for the vehicle (see “MAXIMUM LOADING
LIMIT” in this section or vehicle labeling).

●

Keep weight on racks centered side to side,
and as low as possible. Be sure cargo is se-
cured – a loose load could change handling
unexpectedly.

●

Make sure the load does not interfere with
your control or ability to see where you are
going.

●

Tie down cargo in the trailer securely. Make
sure cargo in the trailer cannot move around.
A shifting load can cause an accident.

●

Reduce speed and allow more room to stop.
A heavier vehicle takes longer to stop.

●

Avoid hills and rough terrain. Choose terrain
carefully. Use extreme caution when towing
or carrying a load on inclines.

●

Turn gradually and go slowly.

Take extra precautions when driving with a load or
trailer. Follow these instructions and always use
common sense and good judgment when carrying
cargo or towing a trailer.

1. Adjusting screw

U4S115E0.book Page 6 Tuesday, February 15, 2011 2:53 PM

«
...
61
62
63
64
65
...
»

Содержание YFM40FBB





























































































































































Отзывы:

Нет отзывов