Yamaha YFM40FBB Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 156

Yamaha YFM40FBB Скачать руководство пользователя страница 123

8-43

8

To charge the battery

Have a Yamaha dealer charge the battery as soon
as possible if it seems to have discharged. Keep in
mind that the battery tends to discharge more
quickly if the ATV is equipped with optional electri-
cal accessories.

NOTICE

ECB00931

To charge a VRLA (Valve Regulated Lead Acid)
battery, a special (constant-voltage) battery
charger is required. Using a conventional bat-
tery charger will damage the battery.

To store the battery

●

If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.

●

If the battery will be stored for more than two
months, check it at least once a month and fully
charge it if necessary.

NOTICE

ECB00940

Always keep the battery charged. Storing a dis-
charged battery can cause permanent battery
damage.

To install the battery

TIP

Be sure the battery is fully charged.

1. Place the battery in its compartment.
2. Connect the positive battery lead first, then

connect the negative battery lead by installing
their bolt.

NOTICE:

When installing the bat-

tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.

[ECB01110]

3. Install the battery holding plate by installing

the bolts.

1. Positive battery lead (red)

2. Negative battery lead (black)

U4S115E0.book Page 43 Tuesday, February 15, 2011 2:53 PM

«
...
121
122
123
124
125
...
»

Содержание YFM40FBB





























































































































































Отзывы:

Нет отзывов