Yamaha YFM40FBB Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 156

Yamaha YFM40FBB Скачать руководство пользователя страница 53

6-6

6

Since the engine is brand new, do not put an ex-
cessive load on it for the first 320 km (200 mi) or 20
hours. The various parts in the engine wear and
polish themselves to the correct operating clear-
ances. During this period, prolonged full-throttle
operation or any condition that might result in en-
gine overheating must be avoided.

0–160 km (0–100 mi) or 0–10 hours

Avoid prolonged operation above 1/2 throttle. Vary
the speed of the ATV regularly. Do not operate it at
one set throttle position.

160–320 km (100–200 mi) or 10–20 hours

Avoid prolonged operation above 3/4 throttle. Rev
the engine through the gears freely, but do not use
full throttle at any time.

320 km (200 mi) or 20 hours and beyond

The ATV can now be operated normally.

NOTICE

ECB00220

If any engine trouble should occur during the
engine break-in period, immediately have a
Yamaha dealer check the ATV.

EBU20722

Parking

When parking the ATV, shift into first gear, stop the
engine, apply the parking brake, and then turn the
fuel cock to “OFF”.

1. Parking brake lock plate

U4S115E0.book Page 6 Tuesday, February 15, 2011 2:53 PM

«
...
51
52
53
54
55
...
»

Содержание YFM40FBB





























































































































































Отзывы:

Нет отзывов