Yamaha Y16ZR 2021 Скачать руководство пользователя страница 92

Страница: 92 / 108

Periodic maintenance and adjustment

8-36

3. Place the motorcycle on the cen-

terstand.

4. Remove the axle nut.
5. Push the wheel forward, and then

remove the drive chain from the
rear sprocket.

TIP

The drive chain does not need to be
disassembled in order to remove and
install the rear wheel.

6. While supporting the brake caliper

and slightly lifting the wheel, pull
the wheel axle out.

TIP

A rubber mallet may be useful to tap
the wheel axle out.

7. Remove the wheel.

NOTICE:

not apply the brake after the
wheel and brake disc have been
removed, otherwise the brake
pads will be forced shut.

[ECA11073]

To install the rear wheel

1. Install the wheel and the brake cal-

iper bracket by inserting the wheel
axle from the right-hand side.

TIP



Make sure that the slot in the
brake caliper bracket is fit over the
retainer on the swingarm.



Make sure that there is enough
space between the brake pads
before installing the wheel.

2. Install the drive chain onto the rear

sprocket.

3. Install the axle nut.
4. Adjust the drive chain slack. (See

page 8-24.)

5. Take the motorcycle off the cen-

terstand so that the rear wheel is
on the ground, and then put the
sidestand down.

6. Tighten the axle nut, the brake cal-

iper bracket bolt, and then tighten
the locknuts to the specified
torques.

1. Rear wheel
2. Wheel axle
3. Brake caliper bracket bolt
4. Brake caliper bracket

Tightening torques:

Axle nut:

59 N·m (5.9 kgf·m, 44 lb·ft)

Brake caliper bracket bolt:

39 N·m (3.9 kgf·m, 29 lb·ft)

Locknut:

7 N·m (0.7 kgf·m, 5.2 lb·ft)

Содержание Y16ZR 2021













































































































Результаты поиска

Содержание Y16ZR 2021

Отзывы:

Похожие инструкции для Y16ZR 2021

Бренды по названию

Популярные бренды

Yamaha Y16ZR 2021, Руководство пользователя

Результаты поиска

Содержание Y16ZR 2021

Отзывы:

Похожие инструкции для Y16ZR 2021

Бренды по названию

Популярные бренды