Yamaha Y16ZR 2021, Руководство пользователя

Страница: 81 / 108

Periodic maintenance and adjustment
8-25
8
3. Tighten the axle nut, the brake cal-
iper bracket bolt, and then tighten
the locknuts to the specified
torques.
4. Make sure that the drive chain
pullers are in the same position,
the drive chain slack is correct,
and the drive chain moves
smoothly.
EAU23018
Cleaning and lubricating the
drive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE
ECA10584
The drive chain must be lubricated
after washing the motorcycle, riding
in the rain or riding in wet areas.
1. Remove all dirt and mud from the
drive chain with a brush or cloth.
TIP
For a thorough cleaning, have a
Yamaha dealer remove the drive chain
and soak it in solvent.
2. Spray Yamaha chain lubricant or
other suitable chain lubricant on
the entire chain, making sure that
all side plates and rollers have
been sufficiently oiled.
1. Brake caliper bracket
2. Brake caliper bracket bolt
1. Washer
2. Alignment marks
3. Drive chain slack adjusting nut
1 2
1
2
(a)
(b)
3
ZAUN0630
Tightening torques:
Axle nut:
90 N·m (9.0 kgf·m, 66 lb·ft)
Brake caliper bracket bolt:
39 N·m (3.9 kgf·m, 29 lb·ft)
Locknut:
7 N·m (0.7 kgf·m, 5.2 lb·ft)