Yamaha XV1700P, Руководство по обслуживанию

Страница: 409 / 515

6 - 16
FI
FUEL INJECTION SYSTEM
Actuator operation verification table
Diag code Item Description of action
Data displayed on meter
(reference value)
30
Ignition coil #1 After 1 second has elapsed from the time the engine stop
switch has been turned from OFF to ON, it actuates ignition
coils #1 for five times every second and illuminates the engine
trouble warning light.
* Connect an ignition checker.
* If the engine stop switch is ON, turn it OFF once, and then
turn it back ON.
Check that spark is generated,
5 times with the engine stop
switch ON.
31
Ignition coil #2 Take the same actions as No. 30 above on ignition coils #2.
Same as above.
* If the engine stop switch is ON, turn it OFF once, and then
turn it back ON.
Same as above
36
Injector #1 After 1 second has elapsed from the time the engine stop
switch has been turned from OFF to ON, it actuates the injec-
tor five times every second and illuminates the engine trouble
warning light.
* If the engine stop switch is ON, turn it OFF once, and then
turn it back ON.
Check the operating sound of
the injector five times with
engine stop switch ON.
37
Injector #2 Take the same actions as No. 36 above on injector #2.
* If the engine stop switch is ON, turn it OFF once, and then
turn it back ON.
Same as above
50
Fuel injection system
relay After 1 second has elapsed from the time the engine stop
switch has been turned from OFF to ON, it actuates the fuel
injection system relay five times every second and illuminates
the engine trouble warning light (the light is OFF when the
relay is ON, and the light is ON when the relay is OFF).
* If the engine stop switch is ON, turn it OFF once, and then
turn it back ON.
Check the fuel injection system
relay operating sound.
Same as above
52
Headlight relay After 1 second has elapsed from the time the engine stop
switch has been turned from OFF to ON, it actuates the head-
light relay five times every 5 seconds and illuminates the
engine trouble warning light. (ON 2 seconds, OFF 3 seconds)
* If the engine stop switch is ON, turn it OFF once, and then
turn it back ON.
Check the relay operating
sound.
Same as above
54
Linear control valve After 1 second has elapsed from the time the engine stop
switch has been turned from OFF to ON, it actuates the linear
control valve four times every 5 seconds and illuminates the
engine trouble warning light (fully closed 2 seconds, fully open
2 seconds). Check the linear control valve
operating sound, 3 times with
the engine stop switch ON.
55
Decompression sole-
noid After 1 second has elapsed from the time the engine stop
switch has been turned from OFF to ON, it actuates the
decompression solenoid five times every 5 seconds and illu-
minates the engine trouble warning light (ON 2 seconds, OFF
3 seconds).
NOTE: Be sure to turn the start switch to ON, otherwise the
above mentioned operation will not be possible. Check the decompression sole-
noid operating sound, 5 times
with the engine stop switch ON.