Instrument and control functions
4-11
1
2
3
4
5
6
7
8
9
10
11
12
3. Tighten the locknut to the specified
torque.
NOTICE:
Always tighten
the locknut against the adjust-
ing ring, and then tighten the
locknut to the specified
torque.
[ECA10132]
WARNING
EWA10222
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
Do not tamper with or attempt to
open the cylinder assembly.
Do not subject the shock ab-
sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
Do not dispose of a damaged or
worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
1. Locknut
2. Spring preload adjusting ring
1. Distance A
1
(b)
(a)
2
1
Spring preload:
Minimum (soft):
Distance A = 207.0 mm (8.15 in)
Standard:
Distance A = 197.0 mm (7.76 in)
Maximum (hard):
Distance A = 187.0 mm (7.36 in)
Tightening torque:
Locknut:
30 N·m (3.0 kgf·m, 22 lb·ft)
B1U-9-75-E0.book 11 ページ ２０２３年４月２０日 木曜日 午後１時５３分
