Yamaha XT225R, Руководство пользователя

Страница: 51 / 108

6-9
PERIODIC MAINTENANCE AND MINOR REPAIR
6
To check the spark plug
1. Check that the porcelain insula-
tor around the center electrode
of the spark plug is a medium-to-
light tan (the ideal color when the
motorcycle is ridden normally).
NOTE:
If the spark plug shows a distinctly
different color, the engine could be
defective. Do not attempt to diagnose
such problems yourself. Instead,
have a Yamaha dealer check the
motorcycle.
2. Check the spark plug for elec-
trode erosion and excessive car-
bon or other deposits, and
replace it if necessary.
NOTE:
If a torque wrench is not available
when installing a spark plug, a good
estimate of the correct torque is
1/4–1/2 turn past finger tight.
However, the spark plug should be
tightened to the specified torque as
soon as possible.
4. Install the spark plug cap.
To install the spark plug
1. Measure the spark plug gap with
a wire thickness gauge and, if
necessary, adjust the gap to
specification.
2. Clean the surface of the spark
plug gasket and its mating sur-
face, and then wipe off any grime
from the spark plug threads.
3. Install the spark plug with the
spark plug wrench, and then
tighten it to the specified torque.
a
a. Spark plug gap
Specified spark plug:
DR8EA (NGK) or
X24ESR-U (DENSO)
Spark plug gap:
0.6–0.7 mm (0.02–0.03 in)
Tightening torque:
Spark plug:
17.5 Nm
(1.75 m
0
kgf, 12.5 ft
0
lbf)
5RK-9-11(US) 4/26/02 7:16 PM Page 49