background image

*ELECTRICAL ed that it can be started only when the trans-

mission is in Neutral or the clutch is disengag

ed.

STARTING CIRCUIT CUT-OFF SYSTEM

The starting circuit cut-off system is employ-

ed. Hence, the following description.

Accordingly, the starter motor will not start

when the transmission is shifted into any

position other than neutral, unless the clutch

lever is pulled in

Description

This model is equipped with a starting circuit

cut-off switch. The starter motor is so design-

COLOR

 CODE

Y Yellow

G Green

Black

Br brown

Sb  

 blue

R/W

 Red/White

B/Y Black,Yeliow
L/B

 Blue/Black

Function of the Diode in the Relay

When the transmission is in a position other

than Neutral:

Turning on the clutch lever switch (Clutch is

disengaged by pulling the clutch lever) makes

the safety relay to turn on.

In this case, the diode interrupts the flow of

current from the main switch to the neutral

indicator light and to the relay, and thus the

light will not come on.

Operation

a) When the transmission is in Neutral:

Neutral switch ON

Clutch lever switch OFF or ON

 When the main switch is turned on

while the transmission is in neutral the

starting circuit cut-off relay circuit is

closed and the relay is actuated.

Содержание XS650G 1978






























Отзывы: