Yamaha XS650G 1978 Скачать руководство пользователя

Страница: 3 / 29

FOREWORD

This Supplementary Service Manual has been prepared to introduce new

service and new data for the XS650H/XS650SH. For complete information

on service procedure, it is necessary to use this Supplementary Service

Manual together with following manuals:

XS650E Service Manual (LIT-11616-00-76)

XS650SE Supplementary Service Manual (LIT-11616-01-08)

XS650SF/2F Supplementary Service Manual (LIT-11616-01-65)

XS650G/SG Supplementary Service Manual (LIT-1 1616-01-75)

SERVICE DEPT.

INTERNATIONAL DIVISION

YAMAHA MOTOR CO., LTD.

NOTE:

This Supplementary Service Manual contains information regarding periodic

maintenance to the emission control system for the XS650H/XS650SH.

Please read this material carefully.

NOTICE

This manual was written by the Yamaha Motor Company primarily for use

by Yamaha dealers and their qualified mechanics. It is not possible to put

an entire mechanic’s education into one manual, so it is assumed that

persons using this book to perform maintenance and repairs on Yamaha

motorcycles have a basic understanding of the mechanical concepts and

procedures inherent to motorcycle repair technology. Without such know-

ledge, attempted repairs or service to this model may render it unfit for use

and/or unsafe.

This model has been designed and manufactured to perform within certain

specifications in regard to performance and emissions. Proper service with

the correct tools is necessary to ensure that the motorcycle will operate as

designed. If there is any question about a service procedure it is imperative

that you contact a Yamaha dealer before continuing. Before attempting any

service, check with your Yamaha dealer for any service information changes

that apply to this model: This policy is intended to provide the customer

with the most satisfaction from his motorcycle and to conform with federal

environmental quality objectives.

Yamaha Motor Company, Ltd. is continually striving to further improve all

models manufactured by Yamaha. Modifications and significant changes in

specifications or procedures will be forwarded to all Authorized Yamaha

dealers and will, where applicable, appear in future editions of this manual.

Содержание XS650G 1978






























Результаты поиска

Содержание XS650G 1978

Отзывы:

Похожие инструкции для XS650G 1978

Бренды по названию

Популярные бренды

Yamaha XS650G 1978, Дополнительное руководство по обслуживанию

Результаты поиска

Содержание XS650G 1978

Отзывы:

Похожие инструкции для XS650G 1978

Бренды по названию

Популярные бренды