INSTRUMENT AND CONTROL FUNCTIONS
3-24
3
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?
With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.
Does the engine start?
With the engine still running:
9. Move the sidestand down.
Does the engine stall?
The system is OK.
The scooter can be ridden.
The sidestand switch may not be working correctly.
The scooter should not be ridden
until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The scooter should not be ridden
until
checked by a Yamaha dealer.
YES
NO
YES
NO
NO
YES
The brake switch may not be working correctly.
The scooter should not be ridden
until
checked by a Yamaha dealer.
•
The vehicle must be placed on the center-
stand during this inspection.
•
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
WARNING
U2DLE1E0.book Page 24 Friday, November 8, 2013 7:45 PM
