INSTRUMENT AND CONTROL FUNCTIONS
3-6
3
The multi-function meter unit is
equipped with the following:
a speedometer
a tachometer
a fuel meter
a clock
an odometer and tripmeter display
a multi-function display
a coolant temperature meter
TIP
Be sure to turn the key to “ON” be-
fore using the “Select”, “Reset”,
“TRIP” and “INFO” buttons.
When the key is turned to “ON”, all
display segments of the multi-
function meter unit will momen-
tarily appear in order to test the
electrical circuit. The speedome-
ter and odometer will then perform
a display check and a welcome
message will scroll across the
multi-function display.
For the UK, traveling speed, dis-
tance traveled, and fuel consump-
tion measurements can be
displayed in kilometer or mileage
based units. To switch between
miles and kilometers; hold the
“SELECT” switch pushed, turn the
main switch to “ON”, and keep the
“SELECT” switch pushed for an
additional 8 seconds.
For other countries, traveling
speed, distance traveled and fuel
consumption measurements are
displayed in kilometer base units.
Spee
d
ometer
The speedometer shows the riding
speed.
Tachometer
The electric tachometer allows the rid-
er to monitor the engine speed and
keep it within the ideal power range.
NOTICE
ECAM1150
Do not operate the en
g
ine in the ta-
chometer hi
g
h-rpm zone.
Hi
g
h-rpm zone: 8000 r/min an
d
a
b
ove
Fuel meter
With the key in the “ON” position, the
fuel meter indicates the amount of fuel
in the fuel tank. The display segments
of the fuel meter disappear towards
“E” (Empty) as the fuel level decreases.
When the fuel level reaches the bottom
segment near “E”, the bottom segment
will flash. Refuel as soon as possible.
1. Tachometer
2. High-rpm zone
ZAUM1136
1
9
8
7
6
5
4
3
2
1
11
10
12
0
1000 r/min
x
km/h
E
F
2
1. Fuel meter
2. Fuel level warning indicator “
”
3. Fuel reserve tripmeter
ZAUM1102
9
8
7
6
5
4
3
2
1
11
10
12
0
1000 r/min
km/h
E
F
C H
km
Trip
Odo
SELECT
RESET
F
3
1
2
U2DLE1E0.book Page 6 Friday, November 8, 2013 7:45 PM
