manualshive.com logo in svg

Yamaha XMAX 250i, Руководство пользователя

Поделиться
Скачать
Yamaha XMAX 250i Скачать руководство пользователя страница 41

EAU16793

Braking

EWA10300

s

s

WARNING

●

Avoid braking hard or suddenly
(especially when leaning over
to one side), otherwise the sco-
oter may skid or overturn.

●

Railroad crossings, streetcar
rails, iron plates on road cons-
truction sites, and manhole
covers become extremely slip-
pery when wet. Therefore, slow
down when approaching such
areas and cross them with cau-
tion.

●

Keep in mind that braking on a
wet road is much more difficult.

●

Ride slowly down a hill, as bra-
king downhill can be very diffi-
cult.

1. Close the throttle completely.
2. Apply both front and rear brakes

simultaneously while gradually
increasing the pressure.

EAU16820

Tips for reducing fuel
consumption

Fuel consumption depends largely on
your riding style. Consider the follo-
wing tips to reduce fuel consumption:

●

Avoid high engine speeds during
acceleration.

●

Avoid high engine speeds with no
load on the engine.

●

Turn the engine off instead of let-
ting it idle for an extended length
of time (e.g., in traffic jams, at
traffic lights or at railroad cros-
sings).

PUSH

OPEN

ZAUM0651 

OPERATION AND IMPORTANT RIDING POINTS

5-3

5

1C0-F8199-E5.QXD  3/10/08 05:56  Página 41

Содержание XMAX 250i





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды