Yamaha XMAX 125i Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 92

background image

Ambient temperature display

1. Frost warning indicator “

”

2. Minus item
3. Temperature

This display shows the ambient tem-
perature from –30 °C (–86 °F) to 50 °C
(122 °F).
The frost warning indicator “

”

automatically comes on if the tempe-
rature is lower than 3°C (37°F).

Oil change indicator “OIL”

1. Oil change indicator “OIL”

The engine oil should be changed
when this indicator comes on. The
indicator stays on until it is reset. After
changing the engine oil, reset the
indicator as follows.

1. While holding the “MODE” and

“SET” buttons pushed, turn the
key to “ON”.

2. Continue holding the “MODE”

and “SET” buttons pushed for
two to five seconds.

3. Release the buttons and the oil

change indicator will go off.

TIP

●

The oil change indicator will
come on at the initial 1000 km
(600 mi), 5000 km (3000 mi) after
the initial 1000 km (600 mi) and
every 6000 km (3600 mi) thereaf-
ter.

●

If the engine oil is changed befo-
re the oil change indicator comes
on (i.e. before the periodic oil
change interval has been rea-
ched), the indicator must be reset
after the oil change for the next
periodic oil change to be indica-
ted at the correct time. After
resetting, the indicator will come
on for two seconds. If the indica-
tor does not come on, repeat the
procedure.

1

ZAUM0582

INSTRUMENT AND CONTROL FUNCTIONS

3-8

3

1B9-F8199-E3.QXD 21/10/08 13:42 Página 23

«
...
21
22
23
24
25
...
»

Содержание XMAX 125i





























































































Отзывы:

Нет отзывов

Похожие инструкции для XMAX 125i

BBOARD-60-N-A-R

Бренд: Brigmton Страницы: 22

Бренд: Baja motorsports Страницы: 45

Бренд: Mod Страницы: 2

Бренд: Hudora Страницы: 8

Бренд: KYMCO Страницы: 46

Бренд: KYMCO Страницы: 41

Бренд: PEUGEOT Страницы: 64

Бренд: KOMFI-RIDER Страницы: 28

Бренд: VESPA Страницы: 194

Бренд: Measurement Systems Страницы: 18

Бренд: Roma Medical Страницы: 20

JOGR JOGRR CS50

Бренд: Yamaha Страницы: 50

CYGNUS RS XC125E

Бренд: Yamaha Страницы: 44

Бренд: Yamaha Страницы: 76

Бренд: Yamaha Страницы: 80

Бренд: Yamaha Страницы: 267

Бренд: Muvi Страницы: 47

Бренд: Iveco Страницы: 110

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды