manualshive.com logo in svg

Yamaha XMAX 125i, Руководство пользователя, Страница: 40 / 92

Поделиться
Скачать
Yamaha XMAX 125i Скачать руководство пользователя страница 40

EAU16780

Acceleration and
deceleration

The speed can be adjusted by ope-
ning and closing the throttle. To incre-
ase the speed, turn the throttle grip in
direction (a). To reduce the speed,
turn the throttle grip in direction (b).

EAU16793

Braking

EWA10300

s

s

WARNING

●

Avoid braking hard or suddenly
(especially when leaning over
to one side), otherwise the sco-
oter may skid or overturn.

●

Railroad crossings, streetcar
rails, iron plates on road cons-
truction sites, and manhole
covers become extremely slip-
pery when wet. Therefore, slow
down when approaching such
areas and cross them with cau-
tion.

●

Keep in mind that braking on a
wet road is much more difficult.

●

Ride slowly down a hill, as bra-
king downhill can be very diffi-
cult.

1. Close the throttle completely.
2. Apply both front and rear brakes

simultaneously while gradually
increasing the pressure.

PUSH

OPEN

ZAUM0651 

(b)

(a)

ZAUM0199

OPERATION AND IMPORTANT RIDING POINTS

5-3

5

1B9-F8199-E3.QXD  21/10/08 13:42  Página 40

Содержание XMAX 125i





























































































Отзывы:

Нет отзывов