background image

1

2

3

4

5

6

7

8

9

4-2

EAU15582

FOR YOUR SAFETY - PRE-OPERATION CHECKS

Before using this vehicle, check the following points:

ITEM

CHECKS

PAGE

Fuel

•  Check fuel level in fuel tank.
•  Refuel if necessary.
•  Check fuel line for leakage.

3-3, 3-8~3-9

Engine oil

•  Check oil level in engine.
•  If necessary, add recommended oil to specifi ed level.
•  Check vehicle for oil leakage.

6-10

Final transmission oil

•  Check vehicle for oil leakage.

6-12

Coolant

•  Check coolant level in reservoir.
•  If necessary, add recommended coolant to specifi ed level.
•  Check cooling system for leakage.

6-13

Front brake

• Check operation.
•  If soft or spongy, have Yamaha dealer bleed hydraulic system.
•  Check lever free play.
•  Adjust if necessary.
•  Check brake pads for wear.
•  Replace if necessary.
•  Check fl uid level in reservoir.
•  If necessary, add specifi ed brake fl uid to specifi ed level.
•  Check hydraulic system for leakage.

6-19~6-22

Rear brake

• Check operation.
•  Lubricate cable if necessary.
•  Check lever free play.
•  Adjust if necessary.

6-19~6-20

Throttle grip

•  Make sure that operation is smooth.
•  Check throttle grip free play.
•  If necessary, have Yamaha dealer adjust throttle grip free play and lubricate 

cable and grip housing.

5-2, 6-16, 6-23

Control cables

•  Make sure that operation is smooth.
•  Lubricate if necessary.

6-22

52S-F8199-E0_CS.indd   4-2

52S-F8199-E0_CS.indd   4-2

2011/11/16   13:07:00

2011/11/16   13:07:00

Process Black

Process Black

Содержание Xenter HW151





















































































Отзывы: