1
2
3
4
5
6
7
8
9
6-11
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Engine oil drain bolt B
4. Clean the oil strainer with solvent,
and then check it for damage and
replace it if necessary.
5. Check the O-ring for damage and
replace it if necessary.
6. Install the oil strainer, compres-
sion spring, O-ring and engine oil
drain bolt B.
TIP
Make sure that the O-ring is properly
seated.
7. Install engine oil drain bolt A, and
then tighten both drain bolts to
their specifi ed torques.
Tightening torque:
Engine oil drain bolt A:
20 Nm (2.0 m·kgf, 14.5 ft·lbf)
Engine oil drain bolt B:
32 Nm (3.2 m·kgf, 23.1 ft·lbf)
8. Refill with the specified amount
of the recommended engine oil,
and then install and tighten the oil
fi ller cap.
Recommended engine oil:
See page 8-1.
Oil change quantity:
1.10 L (1.16 US qt, 0.97 Imp.qt)
ECA11670
NOTICE
●
Do not use oils with a diesel
specifi cation of “CD” or oils of
a higher quality than specifi ed.
In addition, do not use oils la-
beled “ENERGY CONSERVING
II” or higher.
●
Be sure no foreign material en-
ters the crankcase.
and B to drain the oil from the
crankcase.
NOTICE: When re-
moving the engine oil drain
bolt B, the O-ring, compression
spring, and oil strainer will fall
out. Take care not to lose these
parts.
[ECAT1021]
1
1. Oil fi ller cap
1
1. Engine oil drain bolt A
52S-F8199-E0_CS.indd 6-11
52S-F8199-E0_CS.indd 6-11
2011/11/16 13:07:01
2011/11/16 13:07:01
Process Black
Process Black
