Yamaha Xenter HW151 страница 21 Скачать руководство пользователя | Manualshive

Страница: 21 / 84

background image

1

2

3

4

5

6

7

8

9

3-5

EAU1044E

INSTRUMENT AND CONTROL FUNCTIONS

Oil change tripmeter

To reset the oil change tripmeter, se-
lect it by pushing the “SELECT” button
until “OIL CHANGE” and “OIL TRIP”
are displayed, and then push the “RE-
SET” button for at least 3 seconds.
After resetting, “OIL CHANGE” will
disappear.
Push the “SELECT” button again to
start the oil change tripmeter; the
display changes to V-belt tripmeter
mode.

Oil change indicator “OIL CHANGE”

This indicator will display at the initial
1000 km (625 mi), then at every 6000
km (3750 mi) thereafter to indicate
that the engine oil should be changed.
After changing the engine oil, reset
the oil change tripmeter.
If the engine oil is changed before
the oil change indicator displays
(i.e., before the periodic oil change
interval has been reached), the oil
change tripmeter must be reset after
the oil change for the next periodic oil
change to be indicated at the correct
time.

TIP

●

If the oil change tripmeter is reset

before the initial 1000 km (625
mi), the next periodic oil change
interval will be at every 6000 km
(3750 mi) thereafter.

●

If the oil change tripmeter in-

dicates “-----”, have a Yamaha
dealer check the multi-function
display, as it may be faulty.

V-belt replacement tripmeter

To reset the V-belt tripmeter, select it
by pushing the “SELECT” button until
“V-BELT” and “BELT TRIP” are dis-
played, and then push the “RESET”
button for at least 3 seconds. After
resetting, “V-BELT” will disappear.
Push the “SELECT” button again to
start the V-belt tripmeter; the display
changes to ODO mode.

V-belt change indicator “V-BELT”

This indicator comes on at every
20000 km (12500 mi) to indicate that
the V-belt should be replaced.
After replacing the V-belt, reset the V-

belt tripmeter.
If the V-belt is replaced before the
V-belt indicator comes on (i.e., be-
fore the periodic V-belt replacement
interval has been reached), the V-belt
tripmeter must be reset after replacing
the V-belt for the next periodic V-belt
replacement to be indicated at the cor-
rect time.

TIP

If the V-belt change indicator displays
“-----”, have a Yamaha dealer check
the multi-function display, as it may be
faulty.

Ambient temperature display “OUT
TEMP”

This display shows the ambient tem-
perature from -10 °C to 40 °C in 1
°C increments. The temperature dis-
played may vary from the ambient
temperature.

TIP

●

If the ambient temperature falls

52S-F8199-E0_CS.indd 3-5

52S-F8199-E0_CS.indd 3-5

2011/11/16 13:07:00

2011/11/16 13:07:00

Process Black

Process Black

«
...
19
20
21
22
23
...
»

Содержание Xenter HW151





















































































Отзывы:

Нет отзывов

Похожие инструкции для Xenter HW151

Бренд: E-Lux Страницы: 40

Бренд: Honda Страницы: 174

Бренд: Afikim Страницы: 40

Бренд: E Rider Страницы: 8

Бренд: King Song Страницы: 48

Бренд: Viro Rides Страницы: 2

Бренд: Huffy Страницы: 20

GTS Super 300 ie 2008

Бренд: VESPA Страницы: 317

Бренд: Yadea Страницы: 19

Бренд: X-TREME Страницы: 12

Бренд: X-TREME Страницы: 17

Бренд: X-TREME Страницы: 32

Бренд: X-TREME Страницы: 30

Бренд: Kaabo Страницы: 9

Бренд: DAELIM Страницы: 4

Smart Urban 500

Бренд: Scooter Wholesales Страницы: 17

Бренд: OCEAN DRIVE Страницы: 94

Бренд: Quadro Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды