manualshive.com logo in svg

Yamaha XC125RR, Руководство пользователя, Страница: 69 / 84

Поделиться
Скачать
Yamaha XC125RR Скачать руководство пользователя страница 69

PERIODIC MAINTENANCE AND ADJUSTMENT

6-32

2

3

4

5

6

7

8

9

EAU42706

Troubleshooting charts

Starting problems or poor engine performance

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start. 
Check the battery.

Operate the electric starter.

4. Compression

There is compression.

There is no compression.

The engine does not start. 
Have a Yamaha dealer check the vehicle.

Have a Yamaha dealer check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the vehicle.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over  
quickly.

The engine turns over  
slowly.

The battery is good.

Dry

Wet

Operate the electric starter.

Check the battery lead connections,
and have a Yamaha dealer charge 
the battery if necessary.

The engine does not start.
Check the ignition.

U2PEE0E0  32 ページ  ２０１４年４月１８日 金曜日 午後４時９分

Содержание XC125RR





















































































Отзывы:

Нет отзывов