manualshive.com logo in svg

Yamaha XC125RR, Руководство пользователя, Страница: 61 / 84

Поделиться
Скачать
Yamaha XC125RR Скачать руководство пользователя страница 61

PERIODIC MAINTENANCE AND ADJUSTMENT

6-24

2

3

4

5

6

7

8

9

in a possible loss of control.

EAU23273

Checking the front fork

The condition and operation of the front
fork must be checked as follows at the
intervals specified in the periodic main-
tenance and lubrication chart.

To check the condition

Check the inner tubes for scratches,
damage and excessive oil leakage.

To check the operation

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion. 

WARNING! To avoid injury,

securely support the vehicle so
there is no danger of it falling
over.

[EWA10752]

2. While applying the front brake,

push down hard on the handlebars

several times to check if the front
fork compresses and rebounds
smoothly.

NOTICE

ECA10591

If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or re-
pair it.

Recommended lubricant:

Lithium-soap-based grease

U2PEE0E0  24 ページ  ２０１４年４月１８日 金曜日 午後４時９分

Содержание XC125RR





















































































Отзывы:

Нет отзывов