Yamaha XC125RR Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 84

Yamaha XC125RR Скачать руководство пользователя страница 51

PERIODIC MAINTENANCE AND ADJUSTMENT

6-14

2

3

4

5

6

7

8

9

TIP

The coolant should be between the
minimum and maximum level marks.

3. If the coolant is at or below the

minimum level mark, remove pan-
el C and the reservoir cap. (See
page 6-8.)

WARNING! Remove

only the coolant reservoir cap.
Never attempt to remove the ra-
diator cap when the engine is
hot.

[EWA15162]

4. Add coolant or distilled water to

raise the coolant to the maximum
level mark, and install the coolant
reservoir cap and the panel.

NO-

TICE:

If coolant is not available,

use distilled water or soft tap
water instead. Do not use hard
water or salt water since it is
harmful to the engine. If water
has been used instead of cool-
ant, replace it with coolant as
soon as possible, otherwise the
cooling system will not be pro-
tected against frost and corro-
sion. If water has been added to
the coolant, have a Yamaha
dealer check the antifreeze con-

tent of the coolant as soon as
possible, otherwise the effec-
tiveness of the coolant will be
reduced.

[ECA10473]

EAU33032

Changing the coolant

The coolant must be changed at the in-
tervals specified in the periodic mainte-
nance and lubrication chart. Have a
Yamaha dealer change the coolant.

WARNING! Never attempt to remove
the radiator cap when the engine is
hot.

[EWA10382]

1. Maximum level mark

2. Minimum level mark

1
2

1. Coolant reservoir cap

1

Coolant reservoir capacity:

0.25 L (0.26 US qt, 0.22 Imp.qt)

U2PEE0E0 14 ページ２０１４年４月１８日金曜日午後４時９分

«
...
49
50
51
52
53
...
»

Содержание XC125RR





















































































Отзывы:

Нет отзывов