Yamaha WR450FB 2012, Руководство по эксплуатации для владельца

Страница: 36 / 392

MULTI-FUNCTION DISPLAY
1-24
TIP
To reset the digits, select the tripmeter involved
and push the "RST" button for 2 seconds or
more.
Setting the tire diameter
TIP
The outer diameter of a tire varies with tire
wear, tire pressure, and course condition.
If the outer diameter of a tire varies with tire
wear or tire pressure, it can be corrected in the
following manner.
TIP
The initial value is preset with approximately
700 mm as 100%.
• If the outer diameter of a tire is larger than the
initial value
o
Provide a larger set value.
• If the outer diameter of a tire is smaller than
the initial value
o
Provide a smaller set value.
1. Compute the difference in outer diameter
from the initial value for the front tire.
Example) If the outer diameter of the tire is
709 mm, which is larger than initial value;
709 mm/700 mm
u
100(%) = 101.3(%)
Range capable of setting: 65.0–115.0%
2. Push the "SLCT1" button and "RST" button
for 2 seconds or more at the same time to
enter tire diameter setting mode.
3. Push the "SLCT1" button (plus) or "SLCT2"
button (minus) and change the setting. A
long push on the button will fast-forward the
digits.
TIP
Colon (:) for the displayed tire diameter repre-
sents the decimal marker.
4. Push the "SLCT1" button and "RST" button
for 2 seconds or more at the same time will
finish the setting.
EAS1DX3052
CHANGEOVER TO BASIC MODE/RACE
MODE
TIP
• RACE MODE displays the average speed, so
it does not display the current speed. Average
speed displayed in RACE MODE will be rep-
resented by a quotient of the distance accu-
mulated by tripmeter A (TRIP A) divided by
the period of time accumulated by the timer.
• Indicators and will light up as an iden-
tifier that shows RACE MODE has been se-
lected.
• RACE MODE cannot display the functions as
in BASIC MODE.
• Changeover to RACE MODE forces the digits
for tripmeter A (TRIP A) in BASIC MODE to be
reset.