Yamaha WR450F 2022 Скачать руководство пользователя

Страница: 95 / 176

FRONT WHEEL

4-3

EAM20095

FRONT WHEEL

EAM30017

REMOVING THE FRONT WHEEL

NOTICE

ECA22340

• Keep any type of magnets (including mag-

netic pick-up tools, magnetic screwdrivers,

etc.) away from the speed sensor or speed

sensor rotor; otherwise, the sensor or rotor

may be damaged, resulting in improper op-

eration.

• Do not drop the speed sensor rotor or sub-

ject it to shocks.

• If any solvent gets on the speed sensor ro-

tor, wipe it off immediately.

1. Use a maintenance stand to raise the front

wheel off the ground.

WARNING

EWA13120

Securely support the vehicle so that there is

no danger of it falling over.

2. Remove:

•

Front wheel

EAM30021

INSTALLING THE FRONT WHEEL

1. Install:

•

Front wheel

TIP

Install the brake disc “1” between the brake pads
“2” correctly.

2. Install:

•

Front wheel sensor

•

Front wheel sensor bracket

NOTICE

ECA21020

Make sure there are no foreign materials in

the front wheel sensor rotor and front wheel

sensor. Foreign materials cause damage to

the front wheel sensor rotor and front wheel

sensor.

TIP

When installing the front wheel sensor, check
the wheel sensor lead for twists.

3. Install:

•

Front wheel axle “1”

TIP

Apply the lithium-soap-based grease to the front
wheel axle.

4. Tighten:

•

Front wheel axle nut “1”

NOTICE

ECA24430

Before tightening the front wheel axle nut,

push down hard on the handlebar(s) several

times and check if the front fork rebounds

smoothly.

5. Tighten:

•

Front wheel axle pinch bolt “1”

Front wheel sensor bolt

7 N·m (0.7 kgf·m, 5.2 lb·ft)

Front wheel axle nut

115 N·m (11.5 kgf·m, 85 lb·ft)

Front wheel axle pinch bolt

21 N·m (2.1 kgf·m, 15 lb·ft)

Содержание WR450F 2022

















































































































































































Результаты поиска

Содержание WR450F 2022

Отзывы:

Похожие инструкции для WR450F 2022

Бренды по названию

Популярные бренды

Yamaha WR450F 2022, Руководство пользователя

Результаты поиска

Содержание WR450F 2022

Отзывы:

Похожие инструкции для WR450F 2022

Бренды по названию

Популярные бренды