background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-18

2

3

4

5

6

7

8

9

EAU21401

Valve clearance 

The valve clearance changes with use,
resulting in improper air-fuel mixture
and/or engine noise. To prevent this
from occurring, the valve clearance
must be adjusted by a Yamaha dealer
at the intervals specified in the periodic
maintenance and lubrication chart.

EAU52881

Tires 

Tires are the only contact between the
vehicle and the road. Safety in all con-
ditions of riding depends on a relatively
small area of road contact. Therefore, it
is essential to maintain the tires in good
condition at all times and replace them
at the appropriate time with the speci-
fied tires.

Tire air pressure

The tire air pressure should be checked
and, if necessary, adjusted before each
ride.

WARNING

EWA10441

Operation of this vehicle with im-
proper tire pressure may cause se-
vere injury or death from loss of
control.

The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).

The tire air pressure must be ad-
justed in accordance with the
riding speed and with the total

weight of rider, cargo, and ac-
cessories approved for this
model.

WARNING

EWA10511

Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident.

Tire air pressure (measured on cold 
tires):

0–90 kg (0–198 lb):

Front:

150 kPa (1.50 kgf/cm

2

, 22 psi)

Rear:

200 kPa (2.00 kgf/cm

2

, 29 psi)

Maximum load*:

90 kg (198 lb)

* Total weight of rider, cargo and ac-

cessories

1DX-9-E2.book  18 ページ  2013年2月26日 火曜日 午後2時34分

Содержание WR450F 2013



































































































Отзывы: