Yamaha WR450F 2013 Скачать руководство пользователя страница 58

Страница: 58 / 98

PERIODIC MAINTENANCE AND ADJUSTMENT

6-15

with solvent, and then squeeze the
remaining solvent out.

WARNING!

Use only a dedicated parts
cleaning solvent. To avoid the
risk of fire or explosion, do not
use gasoline or solvents with a
low flash point.

[EWA10431]

NOTICE:

To avoid damaging the foam
material, handle it gently and
carefully, and do not twist or
wring it.

[ECA10511]

4. Apply oil of the recommended type

to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.

TIP

The sponge material should be wet but
not dripping.

5. Pull the sponge material over the

air filter element frame.

TIP



Align the projection on the air filter
element frame with the hole in the
sponge material.



Apply the lithium soap base

grease on the matching surface on
the sponge material.

6. Insert the air filter element into the

air filter case.

NOTICE:

Make sure

that the air filter element is prop-
erly seated in the air filter case.
The engine should never be op-
erated without the air filter ele-
ment installed, otherwise the
piston(s) and/or cylinder(s) may
become excessively worn.

[ECA10481]

TIP

Align the projection on the air filter ele-
ment with the hole in the air filter case.

1. Air filter element frame

2. Sponge material

Recommended oil:

Yamaha foam air filter oil or other
quality foam air filter oil

1. Projection

2. Hole

3. Matching surface

1DX-9-E2.book 15 ページ２０１３年２月２６日　火曜日　午後２時３４分

Содержание WR450F 2013



































































































Результаты поиска

Содержание WR450F 2013

Отзывы:

Похожие инструкции для WR450F 2013

Бренды по названию

Популярные бренды

Yamaha WR450F 2013, Руководство пользователя

Результаты поиска

Содержание WR450F 2013

Отзывы:

Похожие инструкции для WR450F 2013

Бренды по названию

Популярные бренды