Yamaha WOLVERINE X2 2021 Скачать руководство пользователя страница 19

Страница: 19 / 186

2-7

BFN-F1684-00

INTAKE MANIFOLD

PRESS. SENSOR

THROTTLE BODY

SOLENOID VALVE

ROLL OVER
VALVE

CANISTER

TO ATMOSPHERE

FROM FUEL TANK

VACUUM HOSE ROUTING

EMISSION HOSE ROUTING

BAN-F4897-20

WARNING

• Load or trailer may affect handling and stability.

• Do not exceed the maximum load ratings for the

cargo bed , trailer tongue, or vehicle.

• When loaded with cargo or towing a trailer:

• Reduce speed and allow more room to stop.

• Turn gradually and slowly.

• Avoid hills and rough terrain.

• Secure cargo so that it will not shift - a loose load

could change handling unexpectedly or be thrown

forward and strike occupants.

• Keep weight in the cargo bed centered side to side and

as low as possible. Top-heavy loads increase the risk of a

rollover.

• Do not tow or pull objects from any point other than

the trailer hitch bracket or winch (if installed).

• Read Owner’s Manual before loading, towing, or pulling objects.

Improper use of cargo area, rear

seats, and/or cage/frame

can result in severe

injury or death from

loss of control, overturn

or other accidents.

Maximum Load in Cargo Bed: 600 lbs (272 kg)

Maximum Vehicle Load: 1160 lbs (525 kg)

Never carry

passengers

in cargo bed.

UBAN12E0.book Page 7 Wednesday, June 30, 2021 2:17 PM

Содержание WOLVERINE X2 2021



























































































































































































Результаты поиска

Содержание WOLVERINE X2 2021

Отзывы:

Похожие инструкции для WOLVERINE X2 2021

Бренды по названию

Популярные бренды

Yamaha WOLVERINE X2 2021, Руководство пользователя

Результаты поиска

Содержание WOLVERINE X2 2021

Отзывы:

Похожие инструкции для WOLVERINE X2 2021

Бренды по названию

Популярные бренды