Yamaha Wolverine RMAX, Руководство пользователя

Страница: 59 / 188

5-28
5
To lower
With hands and fingers clear of pinch points,
lower the cargo bed slowly to its original po-
sition and be sure it is locked into place.
WARNING! Keep hands, body, and other
people away from pinch points when low-
ering bed. Do not hold onto the
cage/frame while closing the bed.
[EWB03260]
EBU39681
Front and rear shock absorber assem-
blies
The shock absorber assemblies are equipped
with a spring preload adjusting nut and a
compression damping force adjuster.
WARNING
EWB04400

Suspension components become hot
during operation. Never touch the com-
pression damping force adjuster or the
oil reservoir with your bare hand or skin
until suspension components have
cooled.

Always adjust the shock absorber as-
semblies on the left and right side to the
same setting. Uneven adjustment can
cause poor handling and loss of stability,
which could lead to an accident.
NOTICE
ECB00091
Never turn an adjusting mechanism be-
yond the minimum and maximum settings.
Spring preload
1. Elevate the vehicle and place a suitable
stand under the frame.
2. Loosen the locknut.
3. Turn the spring preload adjusting nut in
direction (a) to increase the spring pre-
load and thereby harden the suspension,
and in direction (b) to decrease the spring
preload and thereby soften the suspen-
sion.
UB4M10E0.book Page 28 Friday, May 15, 2020 3:52 PM