Yamaha WaveRunner VX Cruiser 2007 страница 52 Скачать руководство пользователя | Manualshive

Страница: 52 / 96

background image

Operation

45

EJU32280

Pre-operation check points

EJU32310

Engine compartment

Ventilate the engine compartment before
each use.
To ventilate the engine compartment, remove
the seat. (See page 26 for seat removal and
installation procedures.) Leave the engine
compartment open for a few minutes to allow
any fuel vapors to escape.
While the engine compartment is open, check
for loose electrical connections.

WARNING

EWJ00460

Failure to ventilate the engine compart-
ment could result in a fire or explosion. Do
not start the engine if there is a fuel leak or
a loose electrical connection.

EJU32350

Hull and deck

Check the hull and deck for cracks and other
damage. If any damage is found, have a
Yamaha dealer repair the watercraft.

EJU32390

Fuel level

Check the fuel system for leakage, cracks,
and malfunctions before each use. (See page
73 for check points and correct procedures.)
(1) Remove the fuel tank filler cap to release

any pressure that might have built up in
the fuel tank.

(2) Remove the seat. (See page 26 for seat

removal and installation procedures.)

(3) Check the fuel level in the fuel tank and

replenish if necessary. (See page 42 for
filling procedures.)

(4) Install the fuel tank filler cap and the seat.

EJU32400

Engine oil level

Check the engine oil level before each use.

CAUTION:

ECJ00390

●

When checking the engine oil level on
water, be careful of other watercraft,
boats, swimmers, and obstacles. The
water current and wind can cause the
watercraft to move and lead to a colli-
sion.

●

When checking the engine oil level on
land, supply water to the cooling water
passages. (See page 66 for procedures
on supplying water.)

●

Make sure that the engine has enough
oil, but do not overfill it. If there is too lit-
tle oil, the engine can be damaged. If
there is too much oil, the air filter can be-
come saturated with oil, permanently
damaging the filter and reducing engine
performance. Follow the checking pro-
cedure carefully.

●

Make sure that debris and water do not
enter the oil tank filler hole. Debris and
water in the engine oil can cause serious
engine damage.

To check the engine oil level:
(1) Place the watercraft in a horizontal posi-

tion or launch the watercraft, and then
start the engine.

(2) Run the engine at trolling speed for 6 min-

utes or more, and then stop the engine.

UF1K72E0.book Page 45 Wednesday, August 2, 2006 10:43 AM

«
...
50
51
52
53
54
...
»

Содержание WaveRunner VX Cruiser 2007

































































































Отзывы:

Нет отзывов

Похожие инструкции для WaveRunner VX Cruiser 2007

Бренд: Nauticstar Страницы: 82

Бренд: feelfree Страницы: 8

Бренд: Zodiac Страницы: 3

Бренд: KAYAKS2FISH Страницы: 17

KAYAK-BW-01-PK-iKAYAK-RED

Бренд: Bluewave Страницы: 6

Бренд: Yamaha Страницы: 2

Бренд: Yamaha Страницы: 32

Бренд: Yamaha Страницы: 84

SX230 High output

Бренд: Yamaha Страницы: 112

Бренд: Yamaha Страницы: 118

Бренд: Yamaha Страницы: 118

Бренд: Yamaha Страницы: 113

Бренд: Yamaha Страницы: 128

SUV1200 WaveRunner 2004

Бренд: Yamaha Страницы: 140

SUV1200 WaveRunner 2003

Бренд: Yamaha Страницы: 140

GP800R WaveRunner 2003

Бренд: Yamaha Страницы: 124

FX Cruiser WaveRunner 2007

Бренд: Yamaha Страницы: 108

Бренд: Yamaha Страницы: 121

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды