5
The “Advanced Control for Microphone” window will now appear as shown below. If you wish to enable
the Mic20dB setting for your microphone, then click on “Mic20dB Enable” box.
Adjusting the Volume of Recording Devices
This section explains how to use the Windows standard volume control to adjust the volume of recording
devices in your computer.
n
The procedures in this section assume that the DS-XG Mixer is already started and the Volume Control window is already displayed.
If this is not the case, refer to the steps illustrated above for the necessary steps to reach this stage.
1
To access the volume control for recording device, click on [Options] in the menu bar and then click on
[Properties].
2
Click on “Recording”. The Recording Control window will now appear as shown below.
3
Adjust the volume as desired for each recording device by dragging the slide-bars vertically.
21
WF192e.qx 5/21/98 9:16 PM Page 21