Yamaha VX110 Sport, Руководство по обслуживанию

Страница: 60 / 347

3-11
E
INSP
ADJ
POWER UNIT
7. Adjust:
• Valve clearance
Adjustment steps:
• Remove the valve lifter
1
and the valve
pad
2
.
NOTE:
• Cover the timing chain opening with a rag
to prevent the valve pad from falling into
the crankcase.
• Note the position of each valve lifter
3
and valve pad
4
so that they can be
installed in the correct place.
• Select the proper valve pad from the fol-
lowing table.
Valve pad thickness
range
Available valve
pads
Nos.
120–240
1.20–
2.40 mm
25 thicknesses in
0.05 mm increments
NOTE:
• The thickness
a
of each valve pad is
marked in hundredths of millimeters on
the side that touches the valve lifter.
• Since valve pads of various sizes are orig-
inally installed, the valve pad number
must be rounded in order to reach the
closest equivalent to the original.
• Round off the original valve pad number
according to the following table.
Last digit Rounded value
0 or 2 0
5 5
8 10
EXAMPLE:
Original valve pad number = 148 (thickness
= 1.48 mm)
Rounded value = 150
• Locate the rounded number of the origi-
nal valve pad and the measured valve
clearance in the valve pad selection
table. The point where the column and
row intersect is the new valve pad num-
ber.
1
2
148
a