PERIODIC MAINTENANCE AND MINOR REPAIR
6-10
6
4. Remove the oil filter element cover
by removing the bolts.
5. Remove and replace the oil filter
element and O-ring.
6. Install the oil filter element cover
by installing the bolts, then tighten-
ing them to the specified torque.
NOTE:
_
Make sure that the O-ring is properly
seated.
_
7. Install the engine oil drain bolt, and
then tighten it to the specified
torque.
8. Add the specified amount of the
recommended engine oil, and
then install and tighten the oil filler
cap.
ECA00133
CAUTION:
_
●
In order to prevent clutch slip-
page (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel speci-
fication of “CD” or oils of a
higher quality than specified. In
addition, do not use oils labeled
“ENERGY CONSERVING II” or
higher.
●
Make sure that no foreign mate-
rial enters the crankcase.
_
1. Bolt (
×
3)
2. Oil filter element cover
Tightening torque:
Oil filter element cover bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1. Oil filter element
2. O-ring
Tightening torque:
Engine oil drain bolt:
34 Nm (3.4 m·kgf, 25 ft·lbf)
Recommended engine oil:
See page 8-1.
Oil quantity:
With oil filter element
replacement:
1.6 L (1.4 Imp qt, 1.7 US qt)
Without oil filter element
replacement:
1.4 L (1.2 Imp qt, 1.5 US qt)
Total amount (dry engine):
1.8 L (1.6 Imp qt, 1.9 US qt)
E_U2UJ1B.book Page 10 Wednesday, May 29, 2002 1:56 PM
Содержание VIRAGO XV250R
