Yamaha VIRAGO XV250R, Руководство пользователя

Страница: 48 / 97

PERIODIC MAINTENANCE AND MINOR REPAIR
6-9
6
2. Start the engine, warm it up for
several minutes, and then turn it off.
3. Wait a few minutes until the oil set-
tles, and then check the oil level
through the check window located
at the bottom-right side of the
crankcase.
NOTE:
_
The engine oil should be between the
minimum and maximum level marks.
_
4. If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
To change the engine oil (with or
without oil filter element replace-
ment)
1. Start the engine, warm it up for
several minutes, and then turn it
off.
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
NOTE:
_
Skip steps 4–6 if the oil filter element is
not being replaced.
_
1. Engine oiil level check window
2. Maximum level mark
3. Minimum level mark 1. Engine oil filler cap 1. Engine oil drain bolt
E_U2UJ1B.book Page 9 Wednesday, May 29, 2002 1:56 PM