Yamaha Tyros5, Справочное руководство

Страница: 98 / 152

98 Tyros5 Reference Manual
6
Use the [E] (SEQUENCE END) button to determine how Registration Sequence behaves
when reaching the end of the sequence.
• STOP
......................Pressing the TAB [
F
] button or the “advance” pedal has no effect. The sequence is
“stopped.”
• TOP
........................The sequence starts again at the beginning.
• NEXT BANK .........The sequence automatically moves to the beginning of the next Registration Memory
Bank in the same folder.
7
Press the [F] (REGISTRATION SEQUENCE ENABLE) button to turn the Registration
Sequence function on.
8
Press the [EXIT] button to exit from the operation display.
After the confirmation message appears, press the [G] (YES) button to store the Registration Sequence program
temporarily.
Saving the Registration Sequence Settings
The settings for the Sequence order and how Registration Sequence behaves when reach-
ing the end of the sequence (SEQUENCE END) are included as part of the Registration
Memory Bank file. To store your newly programmed Registration Sequence, save the cur-
rent Registration Memory Bank file.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection display.
2
Make sure the MENU 2 is shown at the bottom right corner of the display.
3
Press the [6

] button to save the Bank file.
[1

]–
[4

]
CURSOR Moves the cursor.
[5

] REPLACE Replaces the number at the cursor position with the currently selected Registration Memory
number.
[6

] INSERT Inserts the number of the currently selected Registration Memory number to the cursor posi-
tion.
[7

] DELETE Deletes the number at the cursor position.
[8

] CLEAR Deletes all numbers in the sequence.
Keep in mind that all Registration
Sequence data is lost when
changing Registration Memory
Banks, unless you’ve saved it
with the Registration Memory
Bank file.
NOTICE