Yamaha Tyros3, Руководство пользователя

Страница: 103 / 120

Installing the Optional DIMMs
Tyros3 Owner’s Manual •
103
3
Remove the four screws from the cover.
4
Insert the two DIMMs into the DIMM sockets.
Open the ejector levers, then insert the DIMM vertically in the socket.
5
Re-install the cover you removed in step 3, in reverse order.
6
Check that the installed DIMMs are functioning properly.
Set the Tyros3 right-side up, turn the power on and check the WAVE RAM by
accessing [VOICE CREATOR]
→
[B] LIBRARY EDIT
→
[8
▼
] PROPERTY.
If the DIMMs have been installed properly, the appropriate available memory size
is indicated in the display.
Removing DIMMs
168-pin DIMMs
Insert the DIMM vertically in the
socket, aligning the notches to the
corresponding protrusions. Press it in firmly until it
“snaps” or locks in place.
Make sure that the DIMM
module is aligned correctly
before you install it.
Notch for alignment
Ejector levers
Press the ejector levers
until the DIMM unlocks. Pull the DIMM vertically
out of the socket.