background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-27

7

ECAU0090

NOTICE

If a taillight bulb of different wattage
than recommended is used, it may
cause the battery to discharge or af-
fect the taillight lighting. 

5. Install the socket (together with the

bulb) by turning it clockwise.

6. Close the seat.

EAUU1570

Replacing a front turn signal 
light bulb 

1. Remove the turn signal light lens

by removing the screw.

2. Remove the turn signal light sock-

et (together with the bulb) by turn-
ing it counterclockwise.

3. Remove the defective bulb by pull-

ing it out.

4. Insert a new bulb into the socket.

ECAU0080

NOTICE

If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected. 

_

5. Install the turn signal light socket

(together with the bulb) by turning
it clockwise.

6. Install the lens by installing the

screw. 

NOTICE:

 Do not over-

tighten the screw, otherwise the
lens may break.

 

[ECA11191]

1. Front turn signal light lens

ZAUU0909

1

1

1GSF8199E0.book  Page 27  Thursday, March 8, 2012  9:24 AM

Содержание TTX AF115FX













































































Отзывы: